Correa-Jullian, Camila, and Katrina M. Groth. "Data requirements for improving the Quantitative Risk Assessment of liquid hydrogen storage systems." International Journal of Hydrogen Energy (2021).
Gabriel, Steven A., Marina Leal, and Martin Schmidt. "On linear bilevel optimization problems with complementarity-constrained lower levels." Journal of the Operational Research Society (2021): 1-11.
Hartmann, K., Correa-Jullian, C., Thorson, J., Groth, K., & Buttner, W. (2021). Hydrogen Component Leak Rate Quantification for System Risk and Reliability Assessment through QRA and PHM Frameworks (No. NREL/CP-5700-79598). National Renewable Energy Lab.(NREL), Golden, CO (United States).
Knisely, Benjamin M., et al. "Quantifying human performance for heterogeneous user populations using a structured expert elicitation." Safety science 143 (2021): 105435.
Lancaster, Greg, and Jeffrey W. Herrmann. "Computer simulation of the effectiveness of novel cardiac arrest response systems." Resuscitation Plus 7 (2021): 100153.
Modarres, Mohammad, Steven Krahn, and James O’Brien. "Understanding and Effectively Managing Conservatisms in Safety Analysis of Nonreactor Nuclear Facilities." Nuclear Technology 207.3 (2021): 424-440.
Sandborn, Peter, and William Lucyshyn. "Sustainment Strategies for System Performance Enhancement." Handbook of Advanced Performability Engineering. Springer, Cham, 2021. 271-297..
Segarra, Jonathan DeJesus, Michelle Bensi, and Mohammad Modarres. "A Bayesian Network Approach for Modeling Dependent Seismic Failures in a Nuclear Power Plant Probabilistic Risk Assessment." Reliability Engineering & System Safety 213 (2021): 107678.
Zhou, Taotao, Enrique López Droguett, and Mohammad Modarres. "Analysis of Common Cause Failures with Effects of Degradation and Maintenance." Nuclear Science and Engineering (2021)..
A. Aria, S. Azarm, M. Modarres, "Layout Optimization of Multi-Type Sensors and Human Inspection Tools with Probabilistic Detection of Localized Damages for Pipelines," IEEE Access Journal, vol. 8, pp. 90598-90614, 2020.
A. Chehade, Z. Shi, and V. Krivtsov, "Power-law nonhomogeneous Poisson process with a mixture of latent common shape parameters," Reliability Engineering & System Safety, vol. 203, pp. 107097, 2020.
C. Correa-Jullian, J. Cardemil, E. Lopez Droguett, M. Behzad, "Assessment of Deep Learning Techniques for Prognosis of Solar Thermal Systems," Renewable Energy, vol. 145, pp. 2178-2191, 2020.
J. DeJesus-Segarra, M. Bensi, M. Modarres, T. Weaver, "Extension of Probabilistic Seismic Hazard Analysis to Account for Spatial Variability of Ground Motions at a Multi-Unit Nuclear Power Plant Site," Structural Safety Journal, vol. 85, 2020.
K.M. Groth, M.R. Denman, T.B. Jones, M.C. Darling, and G.F. Luger, "Building and using dynamic risk-informed diagnosis procedures for complex system accidents," Proceedings of the Institution of Mechanical Engineers: Part O, vol. 234, no. 1, pp. 193-207, 2020.
R. Heidary and K.M. Groth, "A hybrid model of internal pitting corrosion degradation under changing operational conditions for pipeline integrity management," Structural Health Monitoring, 2020.
S.F. Karimian, H.A. Bruck, and M. Modarres, "A New Method for Detecting Fatigue Crack Initiation in Aluminum Alloy Using Acoustic Emission Waveform Information Entropy," Engineering Fracture Mechanics, vol. 223, 2020.
M. Modarres, S. Krahn, J. O'Brien, "Understanding and Effectively Managing Conservatisms in Safety Analysis," Nuclear Technology, Accepted for Publication, July 2020, In Press.
D. Verstraete, E. Droguett, M. Modarres, "A Deep Adversarial Approach Based on Multi-Sensor Fusion for Semi-Supervised Remaining Useful Life Prognostics," Sensors, vol. 20, no. 176, 2020.
A. Yevkin and V. Krivtsov, "A Generalized Model for Recurrent Failures Prediction," Reliability Engineering & System Safety, In Press, 2020.
T. Zhou, E. Droguett, and M. Modarres, "A Common Cause Failure Model for Components Under Age-Related Degradation," Reliability Engineering and System Safety Journal, vol. 195, 2020.
A. Aria, E. Droguett, S. Azarm, and M. Modarres, "Estimation of Damage Size and Remaining Useful Life in Degraded Structures through Deep-Learning Based Multi-Source Data Fusion," Structural Health Monitoring Journal, 2019.
G. Baecher, M. Bensi, A. Reilly, B. Phillips, L.E. Link, S. Knight, and G. Galloway, "Resiliently Engineered Flood and Hurricane Infrastructure: Principles to Guide the Next Generation of Engineers," The Bridge, vol. 49m no. 2, 2019.
H. Bylling, S.A. Gabriel, T.K. Boomsma, "A Parametric Programming Approach to Bilevel Optimisation with Lower-Level Variables in the Upper Level," Journal of Operational Research Society, 2019.
S. Cofre, P. Kobrich, E. Lopez Droguett, V. Meruane, "Deep Convolutional Neural Network Based Structural Damage Localization and Quantification Using Transmissibility Data," Journal of Shock and Vibration, 2019.
K. Dachert, S. Siddiqui, J. Saez-Gallego, S.A. Gabriel, and J.M. Morales, "A bicriteria perspective on L-Penalty Approaches--A corrigendum to Siddiqui and Gabriel's L-Penalty Approach for Solving MPECs," Networks and Spatial Economics, pp. 1-16, 2019.
H. Duarte, E.L. Droguett, "A Novel Quantitative Ecological and Microbial Risk Assessment Methodology," Human and Ecological Risk Assessment: An International Journal, vol. 26, no. 6, pp. 1622-1645, 2019.
F.D. Fomeni, S.A. Gabriel, M.J. Anjos, "An RLT Approach for Solving the Binary-Constrained Mixed Linear Complementarity Problem," Computers and Operations Research, vol. 110, pp. 48-59, 2019.
K.M. Groth, R. Smith, and R. Moradi, "A hybrid approach to HRA using simulator data, causal models, and cognitive science," Reliability Engineering and System Safety, vol. 191, no. 11, 2019.
I. Ilieva and S.A. Gabriel, "The Impact of End-User Market Integration and Smart Grid on Electricity Retailers in the Nordic Region," The Journal of Energy Markets, (Submitted, March 2019).
S. F. Karimian, H. A. Bruck, and M. Modarres, "Thermodynamic Entropy to Detect Fatigue Crack Initiation Using Digital Image Correlation, and Effect of Overload Spectrums," International Journal of Fatigue, vol. 129, 2019.
V. Meruane, C. Espinoza, E. Lopez Droguett, A. Ortiz-Bernardin, "Impact Identification using Nonlinear Dimensionality Reduction and Supervised Learning," Smart Materials and Structures, vol. 28, no. 11, 2019.
V. Meruane, I. Fernandez, R.O. Ruiz, E. Lopez Droguett, "Gapped Gaussian Smoothing Technique for Debonding Assessment with Automatic Thresholding," Structural Control and Health Monitoring, vol. 26, no. 8, 2019.
R. Moradi and K.M. Groth, "Hydrogen Storage and Delivery: Review of the state of the art technologies and risk and reliability analysis," International Journal of Hydrogen Energy, vol. 44, no. 23, pp. 12245-12269, 2019.
P. Nation and M. Modarres, "Modelling Uncertainty in Reliability Growth Planning for Discrete-Use Systems," Australian Journal of Multidisciplinary Engineering, vol. 15, no. 1, 2019.
M. Reisi, S.A. Gabriel, and B. Fahimnia, "Supply chain competition on shelf space and pricing for soft drinks: A bilevel optimization approach," International Journal of Production Economics, vol. 211, pp. 237-250, 2019.
E. Rudnick-Cohen, S. Azarm, and J.W. Herrmann, "Non-Convex Feasibility Robust Optimization via Scenario Generation, Scenario Reduction and Local Refinement," Journal of Mechanical Design, Published Online September 2019.
A. Ruiz-Tagle, E. Lopez Droguett, R. Pascual, "A Novel Deep Capsule Neural Networks for Remaining Useful Life Estimation," Journal of Risk and Reliability, vol. 234, no. 1, pp. 151-167, 2019.
N. Scala, A. Reilly, P. Goethals, M. Cukier, "Risk and the Five Hard Problems of Cybersecurity," Risk Analysis, vol. 39, no. 10, pp. 2119-2126.
J.R. Schaperow, S.A. Gabriel, M. Siemann, and J. Crawford, "A Simulation-Based Model for Optimal Demand Response Load Shifting: Case Study for the Texas Power Market," The Journal of Energy Markets, (Accepted, March 2019).
J.D. Segarra, M. Bensi, M. Modarres, and T. Weaver, "Extension of Probabilistic Seismic Hazard Analysis to Account for Spatial Variability of Ground Motions at a Multi-Unit Nuclear Power Plant Site," Structual Safety Journal, vol. 85, pp. 101958, 2019.
D. Verstraete, E. Droguett, A. Ferrada, V. Meruane, M. Modarres, "Deep Semi-Supervised Generative Adversarial Fault Diagnostics of Rolling Element Bearings," Structural Health Monitoring Journal, pp. 1-22, 2019.
H. Yun and M. Modarres, "Measures of Entropy to Characterize Fatigue Damage in Metallic Materials," Entropy Journal, vol. 21, no. 8, 2019.
T. Zhou, M. Modarres, E.L. Droguett, "Multi-Unit Risk Aggregation with Consideration of Uncertainty and Bias in Risk Metrics," Reliability Engineering and System Safety Journal, vol. 188, pp. 473-182, 2019.
M. Aliyari, Y.Z. Ayele, A. Barabadi, E. Lopez Droguett, "Risk Analysis in Low Voltage Distribution Systems," Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, vol. 233, no. 2, pp. 118-138, 2018.
L. Costa, H. Duarte, E. Lopez Droguett, D. Veleda, "Practical Aspects of Meteorology and Oceanography for Mariners: A Guide for the Perplexed," Cogent Engineering, vol. 5, vol. 1, 2018.
H. Duarte, E. Lopez Droguett, M. Moura, "Quantitative Ecological Risk Assessment of Shortfin Mako Shark (Isurus Oxyrinchus): Proposed Model and Application Example," Applied Ecology and Environmental Research, vol. 16, no. 3, pp. 3691-3709, 2018.
F.D. Fomeni, S.A. Gabriel, and M.F. Anjos, "Applications of logic constrained equilibria to traffic networks and to power systems with storage," Journal of the Operational Research Society, vol. 70, no. 2, pp. 310-325, 2018.
E. Gralla, J. W. Herrmann, & M. Morency, "Design Problem Decomposition: An Empirical Study of Small Teams of Facility Designers," Research in Engineering Design, pp. 1-25, 2018.
M.R. Hesamzadeh, J. Rosellon, S.A. Gabriel, and I. Vogelsang, "A simple regulatory incentive mechanism applied to electricity transmission pricing and investment," Energy Economics, vol. 75, pp. 423-439, 2018.
R. Heidary, S. Gabriel, M. Modarres, K. Groth, and N. Vahdati, "A Review of Oil and Gas Pipeline Pitting Corrosion Growth Models Applicable for Prognostic and Health Management," International Journal of Prognostics and Health Management, vol. 9, 2018.
J. W. Herrmann, M. Morency, A. Anparasan, & E. Galla, "Evaluating Clustering Algorithms for Identifying Design Subproblems," Journal of Mechanical Design, vol. 140, pp. 081401-1-12, 2018.
C. Iamsumang, A. Mosleh, M. Modarres, "Monitoring and Learning Algorithms for Dynamic Hybrid Bayesian Network in On-line System Health Management Applications," Reliability Engineering and System Safety, vol. 178, pp. 118-129, 2018.
A. Keshtgar, C. Sauerbrunn, M. Modarres, "Structural Reliability Prediction Using Acoustic Emission-based Modeling of Fatigue Crack Growth," Applied Sciences, vol. 8, no. 8, pp. 1225, 2018.
A. Keshtgar and M. Modarres, "Fatigue Crack Initiation Sizing Using Acoustic Emission," Journal of Civil Engineering and Architecture, vol. 11, pp. 1112-1122, 2018.
V.V. Krivtsov, S. Amari, V.I. Gurevich, "Load Sharing in Series Configuration," Wiley International Journal on Quality and Reliability, vol. 34, no. 1, pp. 15-26, 2018.
I. Lins, M.C. Moura, E. Lopez Droguett, T.I. Correa, "Combining Generalized Renewal Processes with Non-Extensive Entropy-Based q-Distributions for Reliability Applications," Entropy, vol. 20, no. 4, 2018.
C. Modarres, N. Astorga, E. Lopez Droguett, V. Meruane, "Conventional Neural Networks for Automated Damage Recognition and Damage Type Identification," Structural Control and Health Monitoring, vol. 25, no. 10, 2018.
E. Rabiei, E. Droguett and M. Modarres, "Fully Adaptive Particle Filtering Algorithm for Damage Diagnosis and Prognosis," Entropy, vol. 20, no. 100, 2018.
G. San Martin, E. Lopez Droguett, V. Meruane, M. Moura, "Deep Variational Auto-Encoders: A Promising Tool for Dimensionality Reduction and Ball Bearing Elements Fault Diagnosis," Structural Control and Health Monitoring, vol. 18, no. 4, pp. 1092-1128, 2018.
R. Smith, M. Modarres, E. Droguett, "A Recursive Bayesian Approach to Small Fatigue Crack Propagation and Detection Modeling," Journal of Risk and Reliability, vol. 232, pp. 738-753, 2018.
R. Weinhold and S.A. Gabriel, "Discretely Constrained Mixed Complementary Problems: Application and Analysis of a Stylized Electricity Market," Journal of the Operational Research Society, (Accepted, December 2018).
T. Zhou, M. Modarres, E. L. Droguett, "An Improved Multi-Unit Nuclear Plant Seismic Probabilistic Risk Assessment Approach," Reliability Engineering and System Safety, vol. 171, pp. 34-37, 2018.
B.R. Champion and S.A. Gabriel, "A Multistage Stochastic Energy Model with Endogenous Probabilities and a Rolling Horizon", Energy and Buildings, vol. 135, pp. 338-349, 2017.
I.D. Da Silva, M.C. Moura, I.D. Lins, E. Lopez Droguett, E. Braga, "Non-Stationary Demand Forecasting Based on Empirical Mode Decomposition and Support Vector Machines," IEEE Latin America, vol. 15, no. 9, pp. 1785-1792, 2017.
N. Diaz, R. Pascaul, F. Ruggeri, E. Lopez Droguett, "Modelling Age Replacement Policy under Multiple Time Scales and Stochastic Usage Profiles," International Journal of Production Economics, vol. 188, pp. 22-28, 2017.
S.A. Gabriel, "Solving Discretely Constrained Mixed Complentarity Problems Using a Median Function," Optimization and Engineering, vol. 18, no. 2, pp. 631-658, 2017.
K. M. Groth and E. S. Hecht, "HyRAM: A methodology and toolkit for quantitative risk assessment of hydrogen systems," International Journal of Hydrogen Energy, vol. 42, no. 11, p. 7485-7493, 2017.
D. Hudson, M. Modarres, "Multi-Unit Accident Contributions to Quantitative Health Objectives: A Safety Goal Policy Analysis," Nuclear Technology Journal, 2017.
A. Imanian and M. Modarres, "A Thermodynamic Entropy-Based Damage Assessment with Applications to Prognosis and Health Management," Structural Health Monitoring, vol. 2017, pp. 1-5, 2017.
A. Kahirdeh, C. Sauerbrunn, H. Yun, and M. Modarres, "A Parametric Approach to Acoustic Entropy Estimation for Assessment of Fatigue Damage," International Journal of Fatigue, 2017.
A. Keshtgar and M. Modarres, "Fatigue Crack Initiation Sizing Using Acoustic Emission," Journal of Civil Engineering and Architecture, vol. 11, pp. 1112-1122, 2017.
V.V. Krivtsov and M. Ya. Frankstein, "A Bayesian Estimation Procedure of Reliability Function for Lifetime Distributions," IJPE, vol. 13, no. 2, pp. 129-134, 2017.
A. C. LaFleur, A. B. Muna, & K. M. Groth, "Application of quantitative risk assessment for performance-based permitting of hydrogen fueling stations," International Journal of Hydrogen Energy, vol. 42(11), pp. 7529-7535, 2017.
V. Meruane, M. Lasen, E. Lopez Droguett, A. Ortiz-Bernardin, "Modal Strain Energy-Based Debonding Assessment of Sandwich Panels using Linear Approximation with Maximum Entropy," Entropy, vol 19, no. 11, 2017.
V. Meruane, P. Veliz, E. Lopez Droguett, A. Ortiz-Bernardin, "Impact Location and Quantification on an Aluminum Sandwich Panel Using Principal Component Analysis and Linear Approximation with Maximum Entropy," Entropy, vol. 19, no. 4, 2017.
M. Modarres, T. Zhou, and M. Massoud, "Advances in Multi-Unit Nuclear Power Plant Probabilistic Risk Assessment," Reliability Engineering and System Safety, vol. 157, pp. 87–100, 2017.
S. Moryadee and S.A. Gabriel, "Panama Canal Expansion: Will Panama Canal be a Game Changer for LNG Exports to Asia?," Journal of Energy Engineering, vol. 143, no. 1, 2017.
M.C. Moura, H. Diniz, E. Lopez Droguett, I. Lins, E. Sales, V. Simoni, "Embedding Resilience in the Design of the Electricity Supply for Industrial Clients," Plos One, vol. 12, no. 11, 2017.
M.C. Moura, J. Santana, E. Lopez Droguett, I. Lins, B. Guedes, "Analysis of Extended Warranties for Medical Equipment: a Stackelberg Game Model Using Priority Queues," Reliability Engineering & System Safety, vol. 168, pp. 338-354, 2017.
R. Pascual, M. Sina, G. Santelices, M. Roman, E. Lopez Droguett, "Optimal Channel Coordination in Use-based Product-Service System Contracts," International Journal of Production Research, vol. 55, no. 23, 2017.
M. Ramos, E. Lopez Droguett, A. Mosleh, M. Moura, M. Martins, "Revisiting Past Refinery Accidents from a Human Reliability Analysis Perspective: the BP Texas City and the Chevron Richmond Accidents," Canadian Journal of Chemical Engineering, vol. 95, no. 12, pp. 2293-2305, 2017.
A. Reilly, R. Dillon, and S. Guikema, "Agent-Based Models as an Integrating Boundary Object for Interdisciplinary Research," Risk Analysis, (Accepted 2017).
A. Reilly, S. Guikema, L. Zhu, T. Igusa, "Evolution of vulnerability of communities facing repeated hazards," PLOS ONE, vol. 12, no. 9, 2017.
A. Reilly, G. Tonn, C. Zhai, and S. Guikema, "Hurricanes, and Power System Reliability - The Effects of Individual Decisions and System-Level Hardening," Proceedings of the IEEE, vol. 105, no. 7, p. 1429-1442, 2017.
C. San Marchi, E. S. Hecht, I. W. Ekoto, K. M. Groth, C. LaFleur, B. P. Somerday, R. Mukundan, T. Rockward, J. Keller, & C. W. James, "Overview of the DOE hydrogen safety, codes and standards program, part 3: Advances in research and development to enhance the scientific basis for hydrogen regulations, codes, and standards," International Journal of Hydrogen Energy, vol. 42, no. 11, pp. 7263-7274, 2017.
C. M. Sauerbrunn, A. Kahirdeh, H. Yun, M. Modarres, "Damage Assessment Using Information Entropy of Individual Acoustic Emission Waveforms During Cyclic Fatigue Loading," Applied Sciences, vol. 7, no. 562, 2017.
I. M. Shuggi, P. A. Shewokis, J. W. Herrmann, & G. Rodolphe, "Changes in motor performance and mental workload during learning of reaching movements: A team dynamics perspective," Experimental Brain Research, vol. 236, no. 2, pp. 433-451, 2017.
T. Skjold, D. Siccama, H. Hisken, A. Brambilla, P. Middha, K. M. Groth, & A. C. LaFleur, "3D risk management for hydrogen installations," International Journal of Hydrogen Energy, vol. 42, no. 11, pp. 7721-7730, 2017.
D. Verstraete, E. Droguett, V. Meruane, M. Modarres, and A. Ferrada, "Deep Learning Enabled Fault Diagnosis Using Time-Frequency Image Analysis of Rolling Element Bearings," Shock and Vibration, vol. 2017, 2017.
M. Xu, E.L. Droguett, I. Lins, M.C. Moura, "On the q-Weibull Distributiom for Reliability Applications: An Adaptive Hybrid Artificial Bee Colony Algorithm for Parameter Estimation," Reliability Engineering & System Safety, vol. 158, pp. 93-105, 2017.
K. Zwirglmaier, D. Straub, & K. M. Groth, "Capturing cognitive causal paths in human reliability analysis with Bayesian network models," Reliability Engineering & System Safety, vol. 158, pp. 117-129, 2017.
Y. Ayele, J. Barabadi, E.L. Droguett, "Dynamic Bayesian Network Based Risk Assessment for Offshore Drilling Waste Handling Practice," Journal of Offshore Mechanics and Arctic Engineering, vol. 138, pp. 1-12, 2016.
M. Devine, S.A. Gabriel, and S. Moryadee, "A Rolling Horizon Approach for Stochastic Mixed Complementarity Problems with Endogenous Learning: Application to Natural Gas Markets," Computers and Operations Research, vol. 68, pp. 1-15, 2016.
H. Duarte, E.L. Droguett, "Quantitative Ecological Risk Assessment of Accidental Oil Spills on Ship Routes Nearby a Marine National Park in Brazil," Human and Ecological Risk Assessment: An International Journal, vol. 22, no. 2, pp.350-368, 2016.
H. Duarte, E.L. Droguett, M.R. Martins, M. Lutzhoft, P. Pereira, J. Lloyd, "Review of Practical Aspects of Shallow Water and Bank Effects," International Journal of Maritime Engineering (RINA Transactions Part A), vol. 158, pp. A-177-A-186, 2016.
M. Gongora, J. Bittencourt, S. Teixeira, L. Basile, F. Pompeu, E.L. Droguett, O. Arias-Carrion, H. Budde, M. Cagy, B. Velasques, A. Nardi, P. Ribeiro, "Low-frequency rTMS over the Parieto-Frontal Network During a Sensorimotor Task: The Role of Absolute Beta Power in the Sensorimotor Integration," Neuroscience Letters, vol. 611, pp. 1-5, 2016.
S. Hamid, O. Jesus, C. Jacinto, R. Izetti, H. Pinto, E.L. Droguett, C. Edwards, J. Cassidy, H. Zhang, P. Dagenais, M. Batocchio, "A Practical Method of Predicting Calcium Carbonate Scale Formation in Well Completions," SPE Production & Operations, vol. 31, no. 1, pp. 1-11, 2016.
A. Imanian and M. Modarres, "Thermodynamics as a Fundamental Science of Reliability," Journal of Risk and Reliability, v. 230, no. 6, pp. 598 - 608, 2016.
C.S. Jackson and M. Modarres, "Sensor-Based Bayesian Inference and Placement: Review and Examples," International Journal of Performability, vol. 12, no. 1, pp. 13-32, 2016.
V.V. Krivtsov, M. Ya. Frankstein, A. Yu. Yevkin, "On Reliability of a Multi-Socket Repairable System," Wiley International Journal on Quality & Reliability, vol. 33, no. 5, pp. 1011-1017, 2016.
M.C. Moura, R. Azevedo, E.L. Droguett, L. Chaves, I.D. Lins, R. Vilela, R. Sales Filho, "Estimation of Expected Number of Accidents and Workforce Unavailability through Bayesian Population Variability Analysis and Markov-Based Model," Reliability Engineering & Systems Safety, vol. 150, pp. 136-146, 2016.
R. Pascual, R. Madariaga, G. Santelices, D. Godoy, E.L. Droguett, "A Structured Methodology to Optimise Throughput of Production Lines," International Journal of Mining, Reclamation and Environment, vol. 30, no. 1, pp. 25-36, 2016.
R. Sales Filho, E.L. Droguett, I.D. Lins, M.C. Moura, M. Amiri, R. Azevedo, "Stress-Strength Reliability Estimation Based on the q-Exponential Distribution," Quality and Reliability Engineering International, vol. 1, pp. 1-21, 2016.
S. Siddiqui and S.A. Gabriel, "Modeling Market Power in the U.S. Shale Gas Market,” Optimization and Engineering, pp. 1-11, 2016.
A. Keshtgar and M. Modarres, "Probabilistic Approach for Nondestructive Detection of Fatigue Crack Initiation and Sizing," International Journal of Prognostics and Health Management, vol. 7 no. 019, p. 1-10, 2016.
C.B.S. Maior, M.C. Moura, I.D. Lins, E. Lopez Droguett, H.H. Diniz, "Remaining Useful Life Estimation by Empirical Mode Decomposition and Support Vector Machine," IEEE Latin America Transactions, vol. 14, no. 11, pp. 4603-4610, 2016.
S. Mukherjee, M. Nuhi, A. Dasgupta, M. Modarres, "Creep Constitutive Models Suitable for Solder Alloys in Electronic Assemblies," ASME Journal of Electronic Packaging, vol. 138, pp. 030801, 2016.
V. Ontiveros, M. Amiri, A. Kahirdeh, M. Modarres, "Thermodynamic Entropy Generation in the Course of the Fatigue Crack Initiation," Fatigue & Fracture Engineering of Material Structures, vol. 40, no. 3, pp. 1-12, 2016.
E. Rabiei, E. L. Droguett, and M. Modarres, "A Prognostics Approach Based on the Evolution of Damage Precursors using Dynamic Bayesian Networks," Advances in Mechanical Engineering, vol. 8, no. 9, pp. 1–19, 2016.
A. Reilly, A. Staid, M. Gao, and S. Guikema, "Computer parallelization for risk analysis: A tutorial," Risk Analysis, vol. 36, no. 10, p. 1844-1854, 2016.
A. Reilly, R. Davidson, L. Nozick, T. Chen, and S. Guikema, "Using data envelopment analysis to evaluate post-hurricane electric-power restoration performance," Reliability Engineering and System Safety, vol. 152, p. 197-204, 2016.
E.S. Rudnick-Cohen, J.W. Herrmann, and S. Azarm, "Risk-Based Path Planning Optimization Methods For UAVs Over Inhabited Areas," ASME Journal of Computing and Information Science in Engineering, vol. 16, no. 2, 021004, 2016.
S. Siddiqui and S.A. Gabriel, "Modeling Market Power in the U.S. Shale Gas Market," Optimization and Engineering, pp. 1-11, 2016.
C. U-tapao, S. Moryadee, S.A. Gabriel, C. Peot, and M. Ramirez, "A Stochastic, Two-Level Optimization for Compressed Natural Gas Infrastructure Investments in Wastewater Management," Journal of Natural Gas Science & Engineering, vol. 28, pp. 226-24, 2016.
B.R. Champion and S.A. Gabriel, "An Improved Strategic Decision-Making Model for Energy Conservation Measures," Energy Strategy Reviews, vol. 6, pp. 92-108, 2015.
E.L. Droguett, I.D. Lins, M.C. Moura, E. Zio, C. Jacinto, "Variable Selection and Uncertainty Analysis of Scale Growth Rate under Pre-Salt Oil Wells Conditions Using Support Vector Regression," Journal of Risk and Reliability, vol. 229, no. 4, pp. 319-326, 2015.
P. Firmino, E.L. Droguett, "An Expert Opinion Elicitation Method Based on Binary Search and Bayesian Intervals," International Journal of Risk Assessment and Management, vol. 18, no. 3/4, pp. 336-362, 2015.
S. Hamid, C. Jacinto, R. Izetti, H. Pinto, E.L. Droguett, C. Edwards, J. Cassidy, H. Zhang, P. Dagenais, and M. Batocchio, “A Practical Method of Predicting Calcium Carbonate Scale Formation in Well Completions,” SPE Production & Operations, vol. 1, pp. 1, 2015.
F. Ibisoglu and M. Modarres, "Probabilistic Life Models for Steel Structures Subject to Creep-Fatigue Damage," International Journal of Prognosis and Health Management, vol.6 (Special Issue Nuclear Energy PHM), pp. 023, 2015.
J. W. Herrmann, "Predicting the Performance of a Design Team Using a Markov Chain Model," IEEE Transactions on Engineering Management, vol. 62, no. 4, pp. 507-516, 2015.
A. Imanian and M. Modarres, "A Thermodynamic Entropy Approach to Reliability Assessment with Applications to Corrosion Fatigue," Entropy, vol. 17, pp. 6995-7020, 2015.
K. G. King & J. W. Herrmann, "Defining and Assessing the Learning Outcomes of a Multidisciplinary Undergraduate Honors Program," Quality Approaches in Higher Education, vol. 6, no. 1, 2015.
H. Liao, K. Groth, & S. Stevens-Adams, "Challenges in leveraging existing human performance data for quantifying the IDHEAS HRA method," Reliability Engineering & System Safety, vol. 144, pp. 159-169, 2015.
I.D. Lins, E.A.L. Droguett, M. Moura, E. Zio, and C.M.C. Jacinto, “Computing confidence and prediction intervals of industrial equipment degradation by bootstrapped support vector regression,” Reliability Engineering & Systems Safety, vol. 137, pp. 120-128, 2015.
A. Martinez, G. Lara, R. Pascual, and E.A.L. Droguett, “Optimal Failure-Finding Intervals for Heat Shields in a Gas Turbine Combustion Chamber Using a Multicriteria Approach,” Journal of Engineering for Gas Turbines and Power, vol. 137, pp. 072501, 2015.
M. Moura, I.D. Lins, E.A.L. Droguett, R. Soares, and R. Pascual, "A Multi-Objective Genetic Algorithm for determining efficient Risk-Based Inspection Programs," Reliability Engineering & Systems Safety, vol. 133, pp. 253-265, 2015.
V. Ontiveros and M. Modarres, "Estimation of Reliability of Structures Subject to Fatigue Loading Using Plastic Strain Energy and Thermodynamic Entropy Generation," Journal of Risk and Reliability, vol. 229 no. 3, pp. 220-236, 2015.
A. Reilly, A. Samuel, and S. Guikema, "Gaming the 'system': Decision making by interdependent critical infrastructure," Decision Analysis, vol. 12, no. 4, p. 155-172, 2015.
R.N. Tamburello and J.W. Herrmann, "A simulation-based approach to determine the evaluation adequacy of system-of-systems operational test configurations," Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, vol. 229, no. 1, pp. 46-51, 2015.
C. U-tapao, S.A. Gabriel, C. Peot, and M. Ramirez, "A Stochastic, Multiobjective, Mixed-Integer Optimization Model for Management of Wastewater-Derived Energy," Journal of Energy Engineering, vol. 141, no. 1, 2015.
M. Amiri and M. Modarres, "Short Fatigue Crack Initiation and Growth in Aluminum 7075-T6," Institution of Mechanical Engineers, Part C: J Mechanical Engineering Science, vol. 227, no. 7, pp. 1206-1214, 2014.
M. Amiri and M. Modarres, "An Entropy-Based Damage Characterization," Entropy 2014, vol. 16, pp. 6434-6463, 2014.
H. De Oliveira Duarte, E.A.L. Droguett, M. Moura, E.C. De Souza Gomes, C. Barbosa, V. Barbosa, and M. Araújo, “An Ecological Model for Quantitative Risk Assessment for Schistosomiasis: The Case of a Patchy Environment in the Coastal Tropical Area of Northeastern Brazil,” Risk Analysis, vol. 34, pp. 831-846, 2014.
E.A.L. Droguett, A. Mosleh, “Bayesian Treatment of Model Uncertainty for Partially Applicable Models,” Risk Analysis, vol. 34, pp. 252-270, 2014.
E.A.L. Droguett, I.D. Lins, M. Moura, E. Zio, and C.M.C. Jacint, “Variable selection and uncertainty analysis of scale growth rate under pre-salt oil wells conditions using support vector regression,” Proceedings of the Institution of Mechanical Engineers. Part O, Journal of Risk and Reliability, vol. 229, no. 4, pp. 319-326, 2014.
K. M. Groth, C. L. Smith, & L. P. Swiler, "A Bayesian method for using simulator data to enhance human error probabilities assigned by existing HRA methods," Reliability Engineering & System Safety, vol. 128, pp. 32-40, 2014.
S. Guikema, R. Nateghi, S.M. Quiring, A. Staid, A. Reilly, and M. Gao, "Predicting hurricane power outagesto support storm planning response," IEEE Access, vol. 2, p. 1364-1373, 2014.
I. Ilieva and S.A. Gabriel, "Electricity Retailer's Behavior in a Highly Competitive and Nordic Electricity Market," The Journal of Energy Markets, vol. 7, no. 4, pp. 17-46, 2014.
F.S. Leite, M.A. Silva, M. Araujo, R.A. Silva, E.A.L. Droguett, “Modeling Subsurface Gas Release in Tropical and Shallow Waters: Comparison with Field Experiments off Brazil's Northeast Coast,” Human and Ecological Risk Assessment: An International Journal, vol. 20, pp. 150-173, 2014.
I.D. Lins, P.R.A. Firmino, D.C. Bezerra, M. Moura, E.A.L. Droguett, L.C. Rego, and C.R. Santos, “Defense-Attack Interaction Over Optimally Designed Defense Systems via Games and Reliability,” Pesquisa Operacional (Impresso), vol. 34, pp. 1-21, 2014.
D. Mallmann, T.C.M. Araujo, and E.A.L. Droguett, “Characterization of central coast of Pernambuco State (Brazil) regarding to short and medium-term erosion,” Quaternary and Environmental Geosciences, vol. 5, pp. 137, 2014.
M.R. Martins, A. Schleder, and E.A.L. Droguett, “A Methodology for Risk Analysis Based on Hybrid Bayesian Networks: Application to the Regasification System of Liquefied Natural Gas Onboard a Floating Storage and Regasification Unit,” Risk Analysis, vol. 34, no. 12, pp. 2098-2120, 2014.
M. Moura, E.A.L. Droguett, R. Ferreira, and P.R.A. Firmino, “A competing risk model for dependent and imperfect condition-based preventive and corrective maintenances,” Proceedings of the Institution of Mechanical Engineers, Part O, Journal of Risk and Reliability, vol. 228, no. 6, pp. 590-605, 2014.
R. Pascual, R. Madariaga, G. Santelices, D. Godoy, and E.A.L. Droguett, “A structured methodology to optimise throughput of production lines,” INT J MIN RECLAM ENV, pp. 1-12, 2014.
M.A. Ramos, E.A.L. Droguett, M.R. Martins, and H.P. Souza, “Comparison of Possible Consequences of LNG Leakages in Offshore and Onshore Terminals: the Case of the Port of Suape,” International Journal of Modeling and Simulation for the Petroleum Industry, vol. 8, pp. 40-48, 2014.
A. Reilly and S. Guikema, "Bayesian multiscale modeling of spatial infrastructure performance predictions with an application to electric-power outage forecasting," Journal of Infrastructure Systems, vol. 21, no. 2, 2014.
M. Wayne and M. Modarres, "A Bayesian Model for Complex System Reliability Growth under Arbitrary Corrective Actions," IEEE Transactions in Reliability, vol. 99, pp. 1-15, 2014.
R. Ak, Y. Li, V. Vitelli, E. Zio, E.A.L. Droguett, and C.M.C. Jacinto, “NSGA-II-trained neural network approach to the estimation of prediction intervals of scale deposition rate in oil & gas equipment,” Expert Systems with Applications, vol. 40, pp. 1205-1212, 2013. Citações: 2|7
M. Amiri, V. Ontiveros, A. Keshtgar, M. Nuhi and M. Modarres, "Probabilistic Structural Health Monitoring," Reliability Information Analysis Center Journal, vol. 21, no. 4, 2013.
K. Chatterjee and M. Modarres, "A Probabilistic Approach for Estimating Defect Size and Density Considering Detection Uncertainties and Measurement Errors," Journal of Risk and Rel., vol. 227, no. 1, pp. 28-40, 2013.
E.A.L. Droguett and A. Mosleh, “Integrated treatment of model and parameter uncertainties through a Bayesian approach,” Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, vol. 227, pp. 41-54, 2013. Citações:1|1
H. Duarte, E.A.L. Droguett, M. Araújo, and S.F. Teixeira, “Quantitative Ecological Risk Assessment of Industrial Accidents: The Case of Oil Ship Transportation in the Coastal Tropical Area of Northeastern Brazil,” Human and Ecological Risk Assessment: An International Journal, vol. 19, pp. 1457-1476, 2013. Citações:4
K. M. Groth and L. P. Swiler, "Bridging the gap between HRA research and HRA practice: A Bayesian network version of SPAR-H," Reliability Engineering and System Safety, vol. 115, pp. 33-42, 2013.
V.V. Krivtsov and A. Yu. Yevkin, "Estimation of G-Renewal Process Parameters as an III-Posed Inverse Problem," Reliability Engineering & System Safety, vol. 115, pp. 10-18, 2013.
S. Schroer and M. Modarres, "An Event Classification Schema for Evaluating Site Risk in a Multi Unit Nuclear Power Plant Probabilistic Risk Assessment," Reliability Engineering and System Safety J., vol. 117, pp. 40-51, 2013.
I.D. Lins, L.C. Rego, M. Moura, and E.A.L. Droguett, “Selection of security system design via games of imperfect information and multi-objective genetic algorithm,” Reliability Engineering & Systems Safety, vol. 112, pp. 59-66, 2013. Citações:1
I.D. Lins, M. Araujo, M. Moura, M.A. Silva, and E.A.L. Droguett, “Prediction of sea surface temperature in the tropical Atlantic by support vector machines,” Computational Statistics & Data Analysis, vol. 61, pp. 187-198, 2013. Citações:4
I.D. Lins, M. Moura, E.A.L. Droguett, E. Zio, and C.M.C. Jacinto, “Failure Prediction of Oil Wells by Support Vector Regression with Variable Selection, Hyperparameter Tuning and Uncertainty Analysis,” Chemical Engineering Transactions, vol. 33, pp. 817-822, 2013.
M. Rabiei and M. Modarres, "Quantitative methods for structural health management using in situ acoustic emission monitoring," International Journal of Fatigue, vol. 49, pp. 81-89, 2013.
M. R. Wayne and M. Modarres, "Modeling Rate of Occurrence of Failures with Log-Gaussian Process Models: A Case Study for Prognosis and Health Management of a Fleet of Vehicles," International Journal of Performability Engineering, vol. 9, no. 6, pp. 701-714, 2013.
A. Yu. Yevkin and V.V. Krivtsov, "Comparative Analysis of Optimal Maintenance Policies under General Repair with Underlying Weibull Distribution," IEEE Transactions on Reliability, vol. 62, no. 1, pp. 82-91, 2013.
S. P. Zhu, H. Huang, R. Smith, V. Ontiveros, L. He, M. Modarres, "Bayesian Framework for Probabilistic Low Cycle Fatigue Life Prediction and Uncertainty Modeling of Aircraft Turbine Disk Alloys," Probabilistic Engineering Mechanics J., vol. 34, pp. 114-122, 2013.
S.P Zhu, H.Z. Huang, V. Ontiveros, L.P He, M. Modarres, "Probabilistic Low Cycle Fatigue Prediction Using Energy-based Damage Parameter and Accounting for Model Uncertainty," Int. J. of Damage, Mech., vol. 21, pp. 1128-1153, 2013.
P. Baraldi, F. Di Maio, E. Zio, S. Sauco, E.A.L. Droguett, and C.M.C. Jacinto, “Sensitivity Analysis of Scale Deposition on Equipment of Oil Wells Plants,” Chemical Engineering Transactions, vol. 26, pp. 327-332, 2012. Citações:6
K. Chatterjee, M. Modarres, and J. B. Bernstein, "Fifty Years of Physics of Failure," RIAC Journal, vol. 20, no. 1, 2012.
K. Chatterjee and M. Modarres, "A Probabilistic Physics-of-Failure Approach to Prediction of Steam Generator Tube Rupture Frequency," Nuclear Science and Engineering, vol. 170, no. 2, pp. 136-150, 2012.
H. Duarte and E.A.L. Droguett, “Análise quantitativa de risco de uma unidade de recuperação de enxofre em uma refinaria de petróleo,” GEPROS, Gestão da Produção, Operações e Sistemas, vol. 7, pp. 23-38, 2012.
K. M. Groth & A. Mosleh, "A data-informed PIF hierarchy for model-based human reliability analysis," Reliability Engineering and System Safety, vol. 108, pp. 154-174, 2012.
K. M. Groth & A. Mosleh, "Deriving casual Bayesian networks from human reliability analysis data: A methodology and example model," Proceedings of the Institution of Mechanical Engineers: Part O: Journal of Risk and Reliability, vol. 226, pp. 361-379, 2012.
W. L. Herring & J. W. Herrmann, "The Single-Day Surgery Scheduling Problem: Sequential Decision-Making and Threshold-Based Heuristics," OR Spectrum, vol. 34, no. 2, pp. 429-459, 2012.
J. W. Herrmann, "Finding Optimally Balanced Words for Production Planning and Maintenance Scheduling," IIE Transactions, vol. 44, no. 3, pp. 215-229, 2012.
J. W. Herrmann, "Using Aggregation to Construct Periodic Policies for Routing Jobs to Parallel Servers with Deterministic Service Times," Journal of Scheduling, vol. 15, no. 2, pp. 181-192, 2012.
R. Kazemi, A. Mosleh, “Improving Default Risk Prediction Using Bayesian Model Uncertainty Technique,” Risk Analysis, vol. 32, no. 11, pp. 1888-1900, 2012.
J. L. LaChance, B. Middleton, and K. M. Groth, "Comparison of NFPA and ISO approaches for evaluating separation distances," International Journal of Hydrogen Energy, vol. 37, no. 22, pp. 17488-17496, 2012.
F.S. Leite, M. Araujo, M.A. Silva, R.A. Silva, P. Tyaquica, and E.A.L. Droguett, “Field Study of a Simulated Subsurface Gas Blowout in Tropical and Shallow Water along the Brazilian Coast,” Tropical Oceanography, vol. 40, pp. 240-261, 2012.
I.D. Lins, M. Moura, E.A.L. Droguett, E. Zio, “A particle swarm-optimized support vector machine for reliability prediction,” Quality and Reliability Engineering International, vol. 28, pp. 141-158, 2012. Citações:8|15
A. Reilly, L.K. Nozick, N. Xu, D. Jones, "Game Theory-Based Identification of Facility Use Restrictions for the Movement of Hazardous Materials Under Terrorist Threat," Transportation Research Part E: Logistics and Transportation Review, vol. 48, no. 1, p. 115-131, 2012.
A. Yu. Yevkin and V.V. Krivtsov, "Approximate Solution to G-Renewal Equation with Underlying Weibull Distribution," IEEE Transactions on Reliability, vol. 61, no. 1, pp. 68-73, 2012.
M. Azarkhail and M. Modarres, "The Evolution and History of Reliability Engineering: Rise of Mechanistic Reliability Modeling," International Journal of Performability Engineering, vol. 7, no. 6, pp. 595-606, 2011.
M. Chookah, M. Nuhi, and M. Modarres, "A Probabilistic Physics-of-Failure Model For Prognostic Health Monitoring of Piping Subject to Pitting and Corrosion-Fatigue," Reliability Engineering & System Safety, vol. 96, no. 12, pp. 1601-1610, 2011.
K. Groth and A. Mosleh, “Deriving causal Bayesian networks from human reliability analysis data: A methodology and example model,” Journal of Risk and Reliability, vol. 226, no. 4, 2011.
W. L. Herring and J. W. Herrmann, "A Stochastic Dynamic Program for the Single-Day Surgery Scheduling Problem," IIE Transactions on Healthcare Systems Engineering, vol. 1, no. 4, pp. 213-225, 2011.
J. W. Herrmann, "Using Aggregation to Reduce Response Time Variability in Cyclic Fair Sequences," Journal of Scheduling, vol. 14, no. 1, p. 39-55, 2011.
C. Jackson and A. Mosleh, “Downwards inference: Bayesian analysis of overlapping higher-level data sets of complex binary-state on-demand systems,” Journal of Risk and Reliability, vol. 226, no. 2, pp. 182–193, 2011.
V.V. Krivtsov, "Field Data Analysis & Statistical Warranty Forecasting," IEE Catalog No. CFP11RAM-CDR, 2011. (Alan O. Plait Best Paper Award).
L. Jinghui, A. Mosleh, and K. Rui, “Biased Monte Carlo method for reliability sensitivity analysis,” Journal of Beijing University of Aeronautics and Astronautics, vol. 37, no. 6, pp. 705–710, 716, 2011.
J. Li, R. Kang, A. Mosleh, and X. Pan, “Simulation and Uniform Design-Based Automatic Generation of Risk Scenarios,” Systems Engineering & Electronics, vol. 22, no. 6. Pp. 1015-1022, 2011.
J. Li, A. Mosleh, and R. Kang, “Likelihood ratio gradient estimation for dynamic reliability applications,” Reliability Engineering & System Safety, vol. 96, no. 12, pp. 1667–1679, 2011.
I.D. Lins, E.A.L. Droguett, “Redundancy allocation problems considering systems with imperfect repairs using multi-objective genetic algorithms and discrete event simulation,” Simulation Modelling Practice and Theory, vol. 19, pp. 362-381, 2011. Citações:7|17
M. Moura, I.D. Lins, E.A.L. Droguett, and E. Zio, “Failure and reliability prediction by support vector machines regression of time series data,” Reliability Engineering & Systems Safety, vol. 96, pp. 1527-1534, 2011. Citações:11|28
M. Pourgolmohamad, A. Mosleh, and M. Modarres, "Structured Treatment of Model Uncertainty in Complex Thermal-Hydraulics Codes; Technical Challenges, Prospective and Characterization," Nuclear Engineering and Design, vol. 241, no. 1, pp. 285-295, 2011.
R. Strunz & J. W. Herrmann, “Reliability As Independent Variable (RAIV): Applied to Liquid Rocket Engine Hot Fire Test Plans,” Journal of Propulsion and Power, vol. 27, no. 5, pp.1032-1044, 2011.
R. Strunz & J. W. Herrmann, “A Reliability As an Independent Variable (RAIV) methodology for optimizing test planning for liquid rocket engines,” CEAS (Council of European Aerospace Societies) Space Journal, vol. 2, no. 1-4, pp.17-30, 2011.
R. Ferreira, P.E.L. Oliveira, P.R.A. Firmino, and E.A.L. Droguett, “Mapa Estratégico para Programas de Recursos Humanos: Avaliando o Desempenho de Redes Bayesianas,” Gestão & Produção (UFSCAR. Impresso), vol. 17, pp. 63-74, 2010.
D. P. Fitzgerald, J. W. Herrmann, & L. C. Schmidt, “A Conceptual Design Tool for Resolving Conflicts between Product Functionality and Environmental Impact,” Journal of Mechanical Design, vol. 132, no. 9, pp. 091006, 2010.
K. Groth, C. Wang, and A. Mosleh, “Hybrid causal methodology and software platform for probabilistic risk assessment and safety monitoring of socio-technical systems,” Reliability Engineering & System Safety, vol. 95, pp. 1276–1285, 2010.
J. W. Herrmann, "The Perspectives of Taylor, Gantt, and Johnson: How to Improve Production Scheduling," International Journal of Operations and Quality Management, vol. 16, no. 3, pp. 243-254, 2010.
J. W. Herrmann, "Progressive Design Processes and Bounded Rational Designers," Journal of Mechanical Design, vol. 132, no. 8, pp. 081005, 2010.
M.P. Kaminsky and V.V. Krivtsov, "G1-Renewal Process as Repairable System Model," Reliability and Risk Analysis: Theory and Applications, vol. 1, no. 3, pp. 7-14, 2010.
M. Moura and E.A.L. Droguett, “Numerical Approach for Assessing System Dynamic Availability Via Continuous Time Homogeneous Semi-Markov Processes,” Methodology and Computing in Applied Probability, vol. 12, pp. 431-449, 2010. Citações:1|1
V. Ontiveros, A. Cartillier, and M. Modarres, "An Integrated Methodology for Assessing Fire Simulation Code Uncertainty," Nuclear Science and Engineering, vol. 166, no. 3, pp. 179–201 2010.
M. Pourgol-Mohamad, A. Mosleh, and M. Modarres, “Methodology for the Use of Experimental Data to Enhance Model Uncertainty Assessment in Thermal Hydraulics Codes,” Reliability Engineering & System Safety, vol. 95, no. 2, 2010.
M. Rabiei, M. Modarres, and P. Hoffman, "Structural Reliability Prognosis and Health Assessment of Airframes Using Non-Destructive Inspection," Reliability Information Analysis Center Journal, 2010.
J. M. Aughenbaugh, and J. W. Herrmann, “Reliability-Based Decision-Making: A Comparison of Statistical Approaches,” Journal of Statistical Theory and Practice, vol. 3, no. 1, pp. 289-304, 2009.
J. M. Aughenbaugh and J.W. Herrmann, “Information Management for Estimating System Reliability using Imprecise Probabilities and Precise Bayesian Updating,” International Journal of Reliability and Safety, vol. 3, no. 1/2/3, pp. 35-56, 2009.
S. Chamberlain, M. Chookah, and M. Modarres, "Development of a Probabilistic Mechanistic Model for Reliability Assessment of Gas Cylinders in Compressed Natural Gas Vehicles," Journal of Risk & Reliability, vol. 233, pp. 289-231, 2009.
J. W. Herrmann, "Design Optimization with Imprecise Random Variables," SAE International Journal of Materials and Manufacturing, vol. 2, no. 1, pp. 99-107, 2009.
P. Karimian & J. W. Herrmann, “Separating Design Optimization Problems into Decision-Based Design Processes,” Journal of Mechanical Design, vol. 131, no. 1, pp. 011007, 2009.
I.D. Lins and E.A.L. Droguett, “Multiobjective Optimization of Availability and Cost in Repairable Systems Design via Genetic Algorithms and Discrete Event Simulation,” Pesquisa Operacional, vol. 29, pp. 43-66, 2009.
M. Modarres, "Technology-Neutral Nuclear Power Plant Regulation Using Risk-Informed and Performance-Based Methods," Reliability Engineering and Systems Safety J., vol. 94, pp. 211– 217, 2009.
Z. Mohaghegh, R. Kazemi, and A. Mosleh, “Incorporating organizational factors into Probabilistic Risk Assessment (PRA) of complex socio-technical systems: A hybrid technique formalization,” Reliability Engineering & System Safety, vol. 94, no. 5, pp. 1000–1018, 2009.
Z. Mohaghegh and A. Mosleh, “Incorporating organizational factors into probabilistic risk assessment of complex socio-technical systems: Principles and theoretical foundations,” Safety Science, vol. 47, no. 8, pp. 1139–1158, 2009.
Z. Mohaghegh and A. Mosleh, “Measurement techniques for organizational safety causal models: Characterization and suggestions for enhancements,” Safety Science, vol. 47, no. 10, pp. 1398–1409, 2009.
M. Moura, E.A.L. Droguett, “Mathematical Formulation and Numerical Treatment for non-Homogeneous semi-Markov Processes Based on Transition Frequency Densities and Quadrature Methods,” Reliability Engineering & Systems Safety, vol. 94, pp. 342-349, 2009. Citações:11|13
M.Pourgol-Mohamad, A. Mosleh, and M. Modarres, “Integrated Methodology for Thermal-Hydraulic Code Uncertainty Assessment with Application,” Nuclear Technology, vol. 165, no. 3, pp. 333-359, 2009.
W. Røed, A. Mosleh, J. E. Vinnem, and T. Aven, “On the use of the hybrid causal logic method in offshore risk analysis,” Reliability Engineering & System Safety, vol. 94, pp. 445–455, 2009.
G. Valbuena, M. Modarres, "Development of Probabilistic Models to Estimate Fire-Induced Cable Damage at Nuclear Power Plants," Nuclear Engineering and Design, vol. 239, pp. 1113–1127, 2009.
X. Wang, M. Modarres, P. Hoffman, "Analysis of crack interactions at adjacent holes and onset of Multi-Site Fatigue Damage in aging airframes," International Journal of Fracture, vol. 156, no. 2, pp. 155-163, 2009.
X. Wang, M. Rabiei, J. Hurtado, P. Hoffman, and M. Modarres, "A Probabilistic-Based Airframe Integrity Management Model," Reliability Engineering and Systems Safety J., vol. 4 pp. 932–941, 2009.
J. M Aughenbaugh and J. W. Herrmann, “A Comparison of Statistical Approaches for Assessing Reliability”, International Journal of Reliability and Safety, vol. 2, no. 4, pp. 265-285, 2008.
M. Chinchokar & J. W. Herrmann, "Estimating Manufacturing Cycle Time and Throughput in Flow Shops with Process Drift and Inspection,” International Journal of Production Research, vol. 46, no. 24, pp. 7057 – 7072, 2008.
E. L. Droguett and A. Mosleh, “Bayesian methodology for model uncertainty using model performance data,” Risk Analysis, vol. 28, no. 5, pp. 1457–1476, 2008.
E.A.L. Droguett, M. Moura, C.M.C. Jacinto, M. Feliciano, “A Semi-Markov Model with Bayesian Belief Network Based Human Error Probability for Availability Assessment of Downhole Optical Monitoring Systems,” Simulation Modelling Practice and Theory, vol. 16, pp. 1713-1727, 2008. Citações:12
J. B. Hall and A. Mosleh, “An analytical framework for reliability growth of one-shot systems,” Reliability Engineering & System Safety, vol. 93, no. 11, pp. 1751–1760, 2008.
J. B. Hall and A. Mosleh, “A Reliability Growth Projection Model for One-Shot Systems,” IEEE Transactions on Reliability, vol. 57, no. 1, pp. 174–181, 2008.
J. W. Herrmann "Disseminating Emergency Preparedness Planning Models as Automatically Generated Custom Spreadsheets," Interfaces, vol. 38, no. 4,p p. 263-270, 2008.
T. W. Hoy & J. W. Herrmann, “Optimal utilization of test facilities to replicate operational environments,” Journal of the IEST, vol. 51, no. 2, pp. 10-19, 2008.
M.P. Kaminsky and V.V. Krivtsov, "An Integral Measure of Aging/Rejuvenation for Repairable and Non-repairable Systems," Reliability and Risk Analysis: Theory & Applications, vol. 1, pp. 69-76, 2008.
V.V. Krivtsov, I.M. Kolmanovsky, and T.P. Davis, "A Constrained Quadratic Spline as a Model for Cumulative Hazard Function," International Journal of Reliability and Safety, vol. 2, no. 3, pp. 170-178. 2008.
V.V. Krivtsov, "On the NHPP with Underlying Distributions of the Location-Scale Family," Reliability Edge, vol. 9, no. 1, pp. 20-24, 2008.
M. Moura, E.A.L. Droguett, “A Continuous-Time Semi-Markov Bayesian Belief Network Model for Availability Measure Estimation of Fault Tolerant Systems,” Pesquisa Operacional, vol. 28, pp. 353-373, 2008.
D. M. Rasmuson, A. Mosleh, and T. E. Wierman, “Insights from analysing the Nuclear Regulatory Commission’s common-cause failure database,” Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, vol. 222, no. 4, pp. 533–544, 2008.
Y-H Chang and A. Mosleh, “Cognitive modeling and dynamic probabilistic simulation of operating crew response to complex system accidents. Part 1: Overview of the IDAC Model,” Reliability Engineering & System Safety, vol. 92, no. 8, pp. 997–1013, 2007.
Y-H Chang and A. Mosleh, “Cognitive modeling and dynamic probabilistic simulation of operating crew response to complex system accidents. Part 2: IDAC performance influencing factors model,” Reliability Engineering & System Safety, vol. 92, no. 8, pp. 1014–1040, 2007.
Y-H Chang and A. Mosleh, “Cognitive modeling and dynamic probabilistic simulation of operating crew response to complex system accidents. Part 3: IDAC operator response model,” Reliability Engineering & System Safety, vol. 92, no. 8, pp. 1041–1060, 2007.
Y-H Chang and A. Mosleh, “Cognitive modeling and dynamic probabilistic simulation of operating crew response to complex system accidents. Part 4: IDAC causal model of operator problem-solving response,” Reliability Engineering & System Safety, vol. 92, no. 8, pp. 1061–1075, 2007.
Y-H Chang and A. Mosleh, “Cognitive modeling and dynamic probabilistic simulation of operating crew response to complex system accidents. Part 5: Dynamic probabilistic simulation of the IDAC model,” Reliability Engineering & System Safety, vol. 92, pp. 1076–1101, 2007.
S. F. Galán, A. Mosleh, and J. M. Izquierdo, “Incorporating organizational factors into probabilistic safety assessment of nuclear power plants through canonical probabilistic models,” Reliability Engineering & System Safety, vol. 92, no. 8, pp. 1131–1138, 2007.
E. L. Droguett and A. Mosleh, “Time To Failure Assessment of Products at Service Conditions from Accelerated Lifetime Tests with Stress-Dependent Spread in Life,” Pesquisa Operacional, vol. 27, no. 2, pp. 209–233, 2007.
D. Zhu, A. Mosleh, and C. Smidts, “A framework to integrate software behavior into dynamic probabilistic risk assessment,” Reliability Engineering & System Safety, vol. 92, no. 12, pp. 1733–1755, 2007.
E.A.L. Droguett, R. Menêzes, “Análise da Confiabilidade Humana via Redes Bayesianas: uma Aplicação à Manutenção de Linhas de Transmissão,” Produção (São Paulo), vol. 17, no.1, pp. 162-185, 2007. Citações:1|8
V.V. Krivtsov, "Recent Advances in Theory & Applications of Stochastic Point Processes in Reliability Engineering," Editorial Review, Reliability Engineering & System Safety, vol. 92, no. 5, pp. 549-551, 2007.
V.V. Krivtsov, "Practical Extensions to NHPP Application in Repairable System Reliability Analysis," Reliability Engineering & System Safety, vol. 92, no. 5, pp. 560-562, 2007.
M. Moura, S. Rocha, E.A.L. Droguett, C.M.C. Jacinto, “Avaliação Bayesiana da Eficácia da Manutenção via Processo de Renovação Generalizado,” Pesquisa Operacional, vol. 27, pp. 569-589, 2007. Citações:1|6
K. Aaby, J. W. Herrmann, C. Jordan, M. Treadwell, & K. Wood, “Montgomery County’s Public Health Service uses operations research to plan emergency mass-dispensing and vaccination clinics,” Interfaces, vol. 36, no. 6, pp. 569-579, 2006.
K. Aaby, R. Abbey, J. W. Herrmann, M. Treadwell, C. Jordan, & K. Wood, “Embracing Computer Modeling to Address Pandemic Influenza in the 21st Century,” Journal of Public Health Management and Practice, vol. 12, no. 4, pp. 365-372, July-August 2006.
E.A.L. Droguett, F. Groen, A. Mosleh, “Bayesian Assessment of the Variability of Reliability Measures,” Pesquisa Operacional, vol. 26, no. 1, pp. 109-127, 2006.
E.A.L. Droguett, A. Mosleh, “Análise Bayesiana da Confiabilidade de Produtos em Desenvolvimento,” Gestão e Produção (UFSCar), São Carlos, vol. 13, no. 1, pp. 57-69, 2006. Citações:4
P.R.A. Firmino, E.A.L. Droguett, “Estimação da Cota Inferior para a Confiabilidade de Sistemas por Árvores de Falhas,” Pesquisa Operacional, vol. 26, pp. 383, 2006.
F. J. Groen, C. Smidts, and A. Mosleh, “QRAS—the quantitative risk assessment system,” Reliability Engineering & System Safety, vol. 91, no. 3, pp. 292–304, 2006.
J. Hurtado, X. Wang, M. Modarres, P. Hoffman, "Probabilistic Airframe Structural Integrity Management," Reliability Analysis Information Center Journal, April, 2006.
C.M.C. Jacinto, E.A.L. Droguett, P. Garcia, “Aspectos Teóricos e Metodológicos para a Realização de uma Análise Quantitativa de Risco na Construção e Restauração de Poços,” Boletim Técnico da Produção de Petróleo, Rio de Janeiro, vol. 1, no. 1, pp. 157-182, 2006.
M.P. Kaminsky and V.V. Krivtsov, "Bayesian Probability Papers," Reliability: Theory & Applications, vol. 1, no. 2, pp. 57-62, 2006.
M.P. Kaminsky and V.V. Krivtsov, "G-Renewal Process in Warranty Data Analysis," Reliability: Theory & Applications, vol. 1, no. 1, pp. 29-34, 2006.
G. Pundoor & J. W. Herrmann, “A hierarchical approach to supply chain simulation modeling using the Supply Chain Operations Reference model,” International Journal of Simulation and Process Modeling, vol. 2, no. 3/4, pp.124-132, 2006.
S. Chamberlain, M. Modarres, "Compressed Natural Gas Safety: A Quantitative Analysis," Risk Analysis J., vol. 25, pp. 377-389, 2005.
D. P. Fitzgerald, J. W. Herrmann, P. A. Sandborn, L. C. Schmidt, & T.Gogoll, “Beyond Tools: a Design for Environment Process,” International Journal of Performability Engineering, vol. 1, no. 2, pp.105-120, 2005.
F. J. Groen and A. Mosleh, “Foundations of probabilistic inference with uncertain evidence,” International Journal of Approximate Reasoning, vol. 39, no. 1, pp. 49–83, 2005.
J.L. Hurtado, F. Joglar, M. Modarres, "Generalized Renewal Process: Models, Parameter Estimation and Applications to Maintenance Problems," International Journal on Performability Engineering, vol. 1, 2005.
F. Joglar, F. Mowrer, M. Modarres, "A Probabilistic Model for Fire Detection with Applications," Fire Technology J., vol. 41, pp. 151-172, 2005.
M.P. Kaminsky and V.V. Krivtsov, "A Simple Procedure for Bayesian Estimation of Weibull Distribution," IEEE Transactions on Reliability, vol. 54, pp. 612-616, 2005.
T. Kashiwagi, F. Du, K. I. Winey, K. M. Groth, J. R. Shields, S. P. Bellayer, H. Kim, & J. F. Douglas, "Flammability properties of polymer nanocomposites with single-walled carbon nanotubes: Effects of nanotube dispersion and concentration," Polymer, v. 46, no. 2, pp. 471-481, 2005.
W. Keller and M. Modarres, "A historical overview of probabilistic risk assessment development and its use in the nuclear power industry: a tribute to the late Professor Norman Carl Rasmussen," Reliability Engineering and System Safety, vol. 89, pp. 271-285, 2005.
F. Li and M. Modarres, "Probabilistic Modeling for Fracture Mechanic Studies of Reactor Vessels with Characterization of Uncertainties," Nuclear Engineering and Design, vol. 235, pp. 1-19, 2005.
M. Modarres, "Technology-Neutral Nuclear Power Plant Regulation: Implications of a Safety Goals-Driven Performance-Based Regulation," Nuclear Engineering & Technology, vol. 37, 2005.
M.I. Awad, M.A. Dejack, and V.V. Krivtsov, "Evaluation of Fatigue Life Regression Models," SAE Technical Paper Series, #2004-01-0625, 2004.
E.A.L. Droguett, F. Groen, A. Mosleh, “The Combined Use of Data and Expert Estimates in Population Variability Analysis,” Reliability Engineering & Systems Safety, Estados Unidos, v. 83, pp. 311-321, 2004. Citações:4|11
P.R.A. Firmino, P.I.C. Moreira, R.T.M. Chikushi, E.A.L. Droguett, “Métodos para a Remoção de Redundâncias de Árvores de Falhas,” Revista Produção Online, vol. 4, no 4, 2004.
F.J. Groen, E. L. Droguett, S. Jiang, and A. Mosleh, “A Reliability Data Collection and Analysis System for Products Under Development,” Brazilian Journal of Operations & Production Management, vol. 1, no. 1, pp. 93–106, 2004.
T. Kashiwagi, F. Du, K. I. Winey, K. Groth, R. Harris, K. Butler, J. Shields, H. Kim, J. F. Douglas, "Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites," Polymer, vol. 45, no. 12, pp. 4227-4239, 2004.
A. Mosleh and Y-H Chang, “Model-based human reliability analysis: prospects and requirements,” Reliability Engineering & System Safety, vol. 83, no. 2, pp. 241–253, 2004.
F. Chauvet, J. W. Herrmann, & J. M. Proth, “Optimization of cyclic production systems: a heuristic approach,” IEEE Transactions on Robotics and Automation, vol. 19, no. 1, pp. 150-154, 2003.
P. A. Sandborn, B. Etienne, J. W. Herrmann, & M.M. Chincholkar, “Cost and production analysis for substrates with embedded passives,” Circuit World, vol. 30, no. 1, pp. 25-30, 2003.
D.E. Tananko, V.V. Krivtsov, and D.C. Rohweder, "Do We Really Need a Spec on Tire Static Balance?" SAE Technical Paper Series, #2003-01-0151, 2003.
G. E. Vieira, J. W. Herrmann, & E. Lin, “Rescheduling manufacturing systems: a framework of strategies, policies, and methods,” Journal of Scheduling, vol. 6, no. 1, pp. 35-58, 2003.
V.V. Krivtsov, D.E. Tananko, and T.P. Davis, "A Regression Approach to Tire Reliability Analysis," Reliability Engineering & System Safety, vol. 78, no. 3, pp. 267-273, 2002.
M. Yanez, F. Joglar, and M. Modarres, "Mathematical Formulation of the Generalized Renewal Process for Modeling Failures in Repairable Systems for Performance-Based Applications," Reliability Engineering and Systems Safety J., vol. 77, pp. 167-180, 2002.
Y. Guan, F. Li, M. Modarres, M. diMarzo, D. Bessette, "Application of Integrated TH-PA Method to the Westinghouse AP600 Reactor," Nuclear Technology J. vol. 133, no. 3, pp. 269 – 289, 2001.
Y. Guan, F. Li, M. Modarres, "A Method of Integrating Thermal Hydraulic Analysis and Probabilistic Assessment for Safety Evaluation and Screening," Nuclear Technology J., vol. 133, no. 3, pp. 290–309, 2001.
J. W. Herrmann & M. M. Chincholkar, “Reducing Throughput Time during Product Design,” Journal of Manufacturing Systems, vol. 20, no. 6, pp.416-428, 2001/2002.
J. W. Herrmann & D. R. Delalio, “Algorithms for sheet metal nesting,” IEEE Transactions on Robotics and Automation, vol. 17, no. 2, pp. 183-190, 2001.
J. W. Herrmann, N. Chandrasekaran, B. F. Conaghan, M. Q. Nguyen, G. W. Rubloff, R. Z. Shi, “Evaluating the impact of process changes on cluster tool performance,” IEEE Transactions on Semiconductor Manufacturing, vol. 13, no. 2, pp. 181-192, 2000.
J. W. Herrmann, S. Balasubramanian, & G. Singh, “Defining specialized design similarity measures,” International Journal of Production Research, vol. 38, no. 15, pp. 3603-3621, 2000.
G. E. Vieira, J. W. Herrmann, & E. Lin, "Analytical models to predict the performance of a single-machine system under periodic and event-driven rescheduling strategies," International Journal of Production Research, vol. 38, no. 8, pp. 1889-1915, 2000.
G. E. Vieira, J. W. Herrmann, & E. Lin, “Predicting the performance of rescheduling strategies for parallel machine systems,” Journal of Manufacturing Systems, vol. 19, no. 4, pp. 256-266, 2000.
J. W. Herrmann, G. Ioannou, I. Minis, & J. M. Proth, "Minimization of acquisition and operational costs in horizontal material handling system design,” IIE (Institute of Industrial Engineers) Transactions, vol. 31, no. 7, pp. 679-693, 1999.
Y.-S. Hu, M. Modarres, "Evaluating System Behavior through Dynamic Master Logic Diagram (DMLD) Modeling," Reliability Engineering and System Safety J., vol. 64, pp. 241-269, 1999.
V.V. Krivtsov and J.W. Case, "Peculiarities of Censored Data Analysis in Automotive Industry Applications," SAE Technical Paper Series, #1999-01-3220, 1999.
I. Minis, J. W. Herrmann, G. Lam, & E. Lin, "A generative approach for concurrent manufacturability evaluation and subcontractor selection,” Journal of Manufacturing Systems, vol. 18, no. 6, pp. 383-395, 1999.
M. Modarres, "Functional Modeling of Complex Systems (Editorial)," Reliability Engineering and System Safety J., vol. 64, 1999.
M. Modarres, S. W. Cheon, "Function-Centered Modeling of Engineering Systems Using the Goal Tree-Success Tree Technique and Functional Primitives," Reliability Engineering and Systems Safety, vol. 64, pp. 181 - 200, 1999.
Y-S. J. Hu and M. Modarres, "Ensuring and Automating Software Assurance Based on a Logic Model," Reliability Engineering & System Safety Journal, Special Issue on Functional Modeling, vol. 64, 1999.
J. Won and M. Modarres, "Improved Bayesian Approach For Diagnosing Partial Failures," Computers and Chemical Engineering J., vol. 22, no. 10, pp.1483-1502, 1998.
M. Fu, J. W. Herrmann, & M. Narayanaswamy, “Setting thresholds for periodic order release,” Journal of Intelligent Manufacturing, v. 8, pp. 369-383, 1997.
J. W. Herrmann, J. M. Proth, & N. Sauer, "Heuristics for unrelated machine scheduling with precedence constraints,” European Journal of Operational Research, v.102, no. 3, pp. 528-537, 1997.
M.P. Kaminsky and V.V. Krivtsov, "A Monte Carlo Approach to Warranty Repair Predictions," SAE Technical Paper Series, #972582, 1997.
S. H. Shen, C. Smidts, and A. Mosleh, “A methodology for collection and analysis of human error data based on a cognitive model: IDA,” Nuclear Engineering and Design, vol. 172, no. 1, pp. 157–186, 1997.
C. Smidts, S. H. Shen, and A. Mosleh, “The IDA cognitive model for the analysis of nuclear power plant operator response under accident conditions. Part I: problem solving and decision making model,” Reliability Engineering & System Safety, vol. 55, no. 1, pp. 51–71, 1997.
S. Swaminathan, J. Y. Van-Halle, C. Smidts, A. Mosleh, S. Bell, K. Rudolph, R. J. Mulvihill, and B. Bream, “The Cassini Mission probabilistic risk analysis: comparison of two probabilistic dynamic methodologies,” Reliability Engineering & System Safety, vol. 58, no. 1, pp. 1–14, 1997.
M. Modarres, "Dominance of Reason over Intuition: Emergence of Risk-Based Regulation," Marine Safety Council Proceedings Coast Guard Journal of Safety at Sea, vol. 53, no. 2, 1996.
Y. S. Hu and M. Modarres, "Time-Dependent System Knowledge Representation Based on Dynamic Master Logic Diagrams," Control Engineering Practice, vol. 4, no. 1, pp. 89-98, 1996.
M. Modarres, H. Martz, M. Kaminskiy, "The Accident Sequence Precursor Analysis: Review of The Methods And New Insights," Nuclear Science and Engineering, vol. 123, pp. 238-258, 1996.
J. A. Julius, E. J. Jorgenson, G. W. Parry, and A. M. Mosleh, “Procedure for the analysis of errors of commission during non-power modes of nuclear power plant operation,” Reliability Engineering & System Safety, vol. 53, no. 2, pp. 139–154, 1996.
J. W. Herrmann, G. Ioannou, I. Minis, & J. M. Proth, “A dual ascent approach to the fixed-charge capacitated network design problem,” European Journal of Operational Research, vol. 95, no. 3, pp. 476-490, 1996.
K. S. Hsueh and A. Mosleh, “The development and application of the accident dynamic simulator for dynamic probabilistic risk assessment of nuclear power plants,” Reliability Engineering & System Safety, vol. 52, no. 3, pp. 297–314, 1996.
A. Mosleh and V. M. Bier, “Uncertainty about probability: A reconciliation with the subjectivist viewpoint,” IEEE Transactions on Systems, Man and Cybernetics, Part A: Systems and Humans, vol. 26, no. 3, pp. 303–310, 1996.
A. Candadai, J. W. Herrmann, I. Minis, “Applications of group technology in distributed manufacturing,” Journal of Intelligent Manufacturing, v. 7, p. 271-291, 1996. Original version published as Candadai, A., J.W. Herrmann, I. Minis, “A group technology-based variant approach for agile manufacturing,” MED-Vol. 1/DE-Vol. 85, Concurrent Product and Process Engineering, International Mechanical Engineering Congress and Exposition, San Francisco, California, November 12-17, 1995, pp. 289-305.
D. Delaney, J. W. Herrmann, G. Ioannou, T. Lu, I. Minis, A. H. Mirza, & R. Palmer, "Design and implementation of a hybrid manufacturing facility," Computers and Industrial Engineering, vol. 29, no. 1-4, pp. 315-319, 1995.
J. W. Herrmann & C. Y. Lee, "Solving a class scheduling problem with a genetic algorithm," ORSA Journal on Computing, vol. 7, no. 4, pp. 443-452, 1995.
J. W. Herrmann, C. Y. Lee, & J. Hinchman, "Global job shop scheduling with a genetic algorithm," Production and Operations Management, vol. 4, no. 1, pp. 30-45, 1995.
J. W. Herrmann, G. Ioannou, I. Minis, R. Nagi, & J. M. Proth, "Design of material flow networks in manufacturing facilities," Journal of Manufacturing Systems, vol. 14, no. 4, pp. 277-289, 1995.
J. Julius, E. Jorgenson, G. W. Parry, and A. Mosleh, “A procedure for the analysis of errors of commission in a probabilistic safety assessment of a nuclear power plant at full power,” Reliability Engineering & System Safety, vol. 50, no. 2, pp. 189–201, 1995.
H. Dezfuli, M. Modarres, and J. Meyer, "Application of REVEAL_W to Risk-Based Configuration Control," Reliability Engineering and System Safety Journal, vol. 44, no. 3, 1994.
A. Macwan and A. Mosleh, “A methodology for modeling operator errors of commission in probabilistic risk assessment,” Reliability Engineering & System Safety, vol. 45, no. 1–2, pp. 139–157, 1994.
A. Mosleh, G. W. Parry, and F. Zikria, “An approach to the analysis of common cause failure data for plant-specific application,” Nuclear Engineering and Design, vol. 150, no. 1, pp. 25–47, 1994.
J. W. Herrmann & C. Y. Lee, "On scheduling to minimize earlinees-tardiness and batch delivery costs with a common due date," European Journal of Operational Research, v. 70, no. 3, pp. 272-288, 1993.
L. Chen and M. Modarres, "Hierarchical Decision Process For Fault Administration," Computers and Chemical Eng. J., vol. 16, no. 5, pp. 425-448, 1992.
V. M. Bier and A. Mosleh, “On Decomposition and Aggregation Error in Estimation: Some Basic Principles and Examples,” Risk Analysis, vol. 12, no. 2, pp. 203-214, 1992.
V.I. Gurevich and V.V. Krivtsov, "New Relay Technology for the Power Network System Automation," Electrical Power Engineering, no. 4, pp. 44-46, 1992.
M. Modarres, A. Mosleh, and J. Wreathall, “A framework for assessing influence of organization on plant safety,” Reliability Engineering & System Safety, vol. 38, no. 1–2, pp. 157–171, 1992.
A. Mosleh, “Bayesian modeling of expert-to-expert variability and dependence in estimating rare event frequencies,” Reliability Engineering & System Safety, vol. 38, no. 1–2, pp. 47–57, 1992.
L. Abbott and M. Modarres, "Consistency Checking During Automatic Knowledge Acquisition For Expert System Development," Heuristic J., vol. 3, no. 2, pp. 29-37, 1991.
V.I. Gurevich and V.V. Krivtsov, "High Voltage Hercone-Semiconducting Commutation Devices for REA Electric Power Supply Systems," Telecommunications and Radio Engineering, Scripta Technica Inc., no. 4, pp. 46-48, 1991.
V.V. Krivtsov and V.I. Gurevich, "New Design Principles of the Overcurrent Protection Based on Magnetically Excited Contacts," Power Engineering, no. 6, pp. 38-43, 1991.
V.V. Krivtsov and V.I. Gurevich, "Optimization Method for Serially Connected Electronic Components," Electronic Equipment, no. 1, pp. 68-91, 1991.
A. Mosleh, “Common cause failures: an analysis methodology and examples,” Reliability Engineering & System Safety, vol. 34, no. 3, pp. 249–292, 1991.
V.I. Gurevich, V.V. Krivtsov, and P.I. Savchenko, "Interface Relays," Soviet Electrical Engineering, Allerton Press, Inc., vol. 61, no. 6, pp. 71-75, 1990.
J. Wang and M. Modarres, "REX: An Intelligent Decision and Analysis Aid For Reliability and Risk Studies," Reliability Eng. & Syst. Safety J., vol. 30, pp. 195-218, 1990.
I. Kim, M. Modarres and N. Hunt, "A Model-Based Approach to On-Line Process Disturbance Management: The Application," Reliability Eng. & Syst. Safety J., vol. 28, pp. 185-239, 1990.
I. Kim, M. Modarres and N. Hunt, "Toward The Practical Use of Expert System Technique For Process Disturbance Management," Reliability Eng. & Syst. Safety J., vol. 28, pp. 314-317, 1990.
I. Kim, M. Modarres and N. Hunt, "A Model-Based Approach to On-line Process Disturbance Management: The Models," Reliability Eng. & Syst. Safety J., vol. 28, pp. 265-305, 1990.
V. M. Bier and A. Mosleh, “The analysis of accident precursors and near misses: Implications for risk assessment and risk management,” Reliability Engineering & System Safety, vol. 27, no. 1, pp. 91–101, 1990.